Working Haunted House Pinball Project for sale. Located in Central CT, game is in my shop on the first floor. You can back right up to load it and I will assist with loading. Delivery available within a few hours for an additional fee. I would rather this go to someone that will enjoy it and is looking for a project than sit in my project queue. And honestly, it is not one of my favorite games. Please see pictures, again this is a project and priced accordingly

Electronics:
It is fully playable, the trap door at some times will open and close. The sound board works but is very faint. I did rebuild the power supply. It probably needs to be repinned and the ground mods done for stability. Caps and/or amp should fix the sound. Displays are all good.

Cabinet:
Cabinet is in good shape overall, however there are two bad areas. One one the left side by the front leg, this can be easily patched and it is in the black area. the other is on the back top right corner, there is a piece missing where the head sits. You can still set up the game and it is very stable bolted down, but it needs a little loving

Playfields:
The Middle and Upper playfields are are in great shape. Very little wear, they present very well. The lower playfield does have some wear and planking. The middle playfield window has no scratching and has new rubber washers and screws. I do have a new cobweb to go with it was well. I believe that all the coils and flippers are good (there are a lot of them).

Backglass:
You will need a new one eventually. Has cracking peeling art that some a$$monkey decided it would be a good idea to lay packing tape all over it to "save it". While it doesn't look that great, I got it to look actually presentable using a color combination on LEDS's.