A little more info. This is a nice above average Getaway with the worst things being some minor insert lifting and a repaired with Mylar notch in the Diamond Plate near the out hole. Otherwise it has fading on the left side of the cabinet and on the front. I bought new legs, an original manual, cabinet protectors, playfield glass and a topper. I rebuilt the high voltage section of the DMD driver board, installed a remote battery holder, socketed the U20 chip on the CPU board and replaced all the common capacitors that are prone to failure along with the bridge rectifier that maintains the 5v for the CPU. Super bands and Cliffy post protectors installed too. Oh, and the sub is not included.