Fully working, partially restored, and fully shopped. Cabinet is solid inside and out. Mylar was placed by the previous owner after wear had begun in the lower and upper parts of the playfield. This is a players machine so what I have done is masked the previous owners mylar, touched up the playfield, and laid down 2 part automotive clear coat to all of the exposed areas, including the shooter lane. There are no broken or cracked plastics. The back glass has a small bit of flaking at the corner of the wing on one of the ships and the typical cracking in some of the red areas, especially in the lower left corner, but still shows well. The machine has one issue and that is the number 8 insert does not light. I assume the socket needs replaced.

The following has been installed or replaced...

All PCB boards completely tested, bullet proofed and updated by John Wart Jr with lithium mod, and new ROMS

Fireproof power supply (fused rectifiers)
All new rubber
New lower flipper return lane guides
New flipper bats
New pop bumper caps, bodies, skirts, springs, metal and fiber yokes
New balls
New Pinball Life complete flipper assemblies and EOS switches
New upper playfield plastic lane guides
New polished acorn nuts replacing the ugly white factory plastic ones
New AC cord
New coin face plates
New flipper buttons