I am putting my restored Batman Forever up for sale. I have gone through a lot taking this game from a nice game to a near perfect game.

I worked for Bill Davis for many years and this is one of the few Batman Forever games he ever did. The playfield looks like glass and the game plays great. Most of these games wear around the black mode inserts in the center of the game. As you can see this one doesn't have that. The playfield is a 10 out of 10 and is a work of art.

When putting the game back together I replaced or rebuilt the following
. Repainted all cabinet bolts
. Rebuilt pops (new yoke, metal ring, purple skirts)
. New Rubber
. Upgraded right flipper coil to make big ramp
. Replaced any bad bulbs/flashers
. Replaced bad fuse clips on power supply
. Replaced bad transistors on flipper board

I also hunted down an original manual and flyer.

The shooter gun is in great shape. These are nearly impossible to find now.

DMD is strong and shows no age.

No fade on cabinet nice and bring colors. Minor flipper wear.

This game is in fantastic shape but is NOT perfect by perfectionist standards

Front edge of cabinet got caught with a pin dolly and split the wood. One small piece is missing and is cracked on the right side

Coin door has tape marks that I cannot seem to get off.

Green wireforms are chipped from the bat cannon. Very common with this game. Can be re-powerdcoated.

The big ramp on the left is chipped on the far left edge. Its located under the ball lock so is not noticeable but should be mentioned. Also the plastic above the drop targets has a corner chipped. Again not noticeable but should be mentioned

The clear coat made the game play much better. That along with the upgraded coil you can now make the big ramps with BOTH flippers. It has made a huge difference in game play. I have also included a before and after picture of the playfield. You can see the after is signed by bill on the bottom right. Game should be problem free for quite some time.

I can take more pictures upon request..


$3800