DE Batman + NOS Playfield

The game itself plays. I admit I have not tested every switch since setting it up but as far as I can tell playing a few games (glass on) everything registers/works.

Cab is rather nice overall. I can see a couple of touch ups in the black background.

Backglass is beautiful front an back.

All the mechs work as expected including the door to the Bat Cave

Boards are clean. No corrosion that I can see.

DMD is bright and clear. I did replace the R95 resistor as its a common failure. The one on this game had failed.

The topper is on the head. It will need to be flattened as it has a curve in it.

The PF in the game has not fared as well. Its more than playable but the art is rough in several places. Looking around online that seems common for a Batman.
It could use a main ramp, sling shot plastics, and a plastic on the left side of the PF. The ramp is playable but the hole to drop the ball back into the playfiled is broken out. The ramp entrance has been patched up at some point as well. Poking around a little while ago I found the pieces across the various pin vendors.

To go with the game I have a NOS Playfield. In short, its gorgeous. I am not telling anyone anything you don't know here, the PF is the value add as its near impossible to find. Check out the pictures, they speak for themselves.
Full disclosure, there is a scuff in the clear, not to paint, by Batman's leg as well as a scuff in the far upper right corner. I suspect anyone that does the swap would re-clear. The pre-sand to prep the surface would be rougher than the scuff by Batman or you can just buff it out. The upper corner is hidden under the ramp and all the plastics etc.

Check out the pictures, please ask questions. If there is something anyone wants to see I have quite a few pictures beyond what's here or I can get specific shots.

I am not looking to separate.