Up for sale is my Addams Family. Purchased it earlier this year from someone who owned it since 99. The previous owner rarely played it due to the fact that they bought it from some idiot "restorer" who obviously didnt know about pinball machines (almost nothing worked as it should). As a result, it rarely got played.

The bad:
Previous "restorer" chose to paint over the decals where there was wear around the flipper buttons. I sanded down and re-vinyled these areas on either side of the cab. Though it looks MUCH better, its not perfect (see picture below).
Ramp is cracked at the base (it plays well, its just visually unappealing).
Had the famous bolt hole in the side where they bolted it to the floor. It has been filled in with wood and epoxy and is really solid now.
Credit dot- this is because i was sent the wrong leaf switches when rebuilding the flippers (normally open switches, will be replaced in the next few days).

****Full album pictures here****** https://goo.gl/photos/svUk6DyYhS3m5aF77

The good:
New Playfield Protector
All ball guides re-grained
Magnet protectors installed
New pop bumper parts
All Coils re-sleeved.
New leg bolts
New leg levelers
Rebuilt all 4 flippers
New rubbers
A few "tasteful" leds spread throughout.
New shooter rod (best mod ever!)
New "Thing" box cover
New standup targets
New kicker plastics
New star posts
New rubbers
Light up flipper buttons (easily removable if its not your thing).
New cliffy for chair scoop.
Tons of other parts.
All boards/components have matching serial numbers (even the topper!).

Should play for a few more years before needing anything. Let me know if you have any questions.