Please add me for a premium, thanks!
(Topic ID: 335062)
Linked Games
Foo Fighters (LE)
Stern, 2023-
Foo Fighters (Premium)
Stern, 2023
Topic Gallery
London, ON
1 week later
Snoqualmie, WA
Melbourne
Lyon
Please add me to the list (LE) . Can you change your name to Business Consultants please? I am going to have some explaining to do if the wife actually looks at all the stuff I order from you.
London
Quoted from jamieflowers:Please add me to the list (LE) . Can you change your name to Business Consultants please? I am going to have some explaining to do if the wife actually looks at all the stuff I order from you.
Hopefully it comes through as my company name Coder Cabana - which is marginally less incriminating!
1 week later
Hannover
Super exclusive ad from the Pinside Marketplace!
1 week later
1 week later
Quoted from Kkoss24:Just asking because I seen the cutouts above .
Oo you've been doing some sneaking on the website!
Yep the alien will be individually lit in the window (triggered by switch hits) and lots of other developments in the last few weeks also. We're aiming to have an in game prototype to show off by Friday next week.
Quoted from stumblor:Oo you've been doing some sneaking on the website!
Yep the alien will be individually lit in the window (triggered by switch hits) and lots of other developments in the last few weeks also. We're aiming to have an in game prototype to show off by Friday next week.
Sweet , this is going to add so much to the “moment “ up there . This has become my favorite upper ,or lower , playfield I’ve played . There’s just enough to do and the pass through lets us chose when to start it up or set up a mode/mb prior all while keeping everything viewable underneath 
Quoted from stumblor:Okay! It's ready!
Here's the first in game look at the new Area 51 building for Prem/LE. Enjoy.
[quoted image]Full details at the start of the thread (in a few minutes)
Ok, I need one of these. I don't have the game yet, but I want the mod for when I do LOL. Please, put me on the list for a premium.
Super exclusive ad from the Pinside Marketplace!
Holy Crap Davey !!! Yupp , I’m just going to buy the pins you choose to put your talent to use on . We’re going to have to come up with a “Edition” name for your pins . How about the DE ? So if someone asks me what pins I have ,I say “I have a IMDN prem , a GZ DE and a FFs DE
Quoted from stumblor:Okay! It's ready!
Here's the first in game look at the new Area 51 building for Prem/LE. Enjoy.
[quoted image]Full details at the start of the thread (in a few minutes)
I luv it! recessing the mounting screws in a vent type top mount was pretty creative!
Quoted from Jamesays:Davey there has been some talk about whether the area 51 building should sit level or cocked to the right (no jokes).Higher on the left.
What are Your thoughts on this ?
Since the original building is formed plastic, there is some variance to how it comes out of the mold. This normally wouldn't matter, however since its only fixed on the left hand side, this variance is more obvious for those people who got a wonky form. Not going to be an issue for this mod since the building itself is a lot more sturdy - 3mm professionally printed nylon in the roof and then reinforced from the PCB that sits underneath it.
Quoted from Kkoss24:Damn , digging the mix biggly
Isn't it sick!
Quoted from stumblor:Since the original building is formed plastic, there is some variance to how it comes out of the mold. This normally wouldn't matter, however since its only fixed on the left hand side, this variance is more obvious for those people who got a wonky form. Not going to be an issue for this mod since the building itself is a lot more sturdy - 3mm professionally printed nylon in the roof and then reinforced from the PCB that sits underneath it.
Isn't it sick!
On mine I think it was crooked because the wires on the right side were too short so it was unable to come up to level with the left mounting side.I think It should be level .some are some are not. thanks
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
