The left flipper on my BSD stays up when game is started. The transistors on the board show good and the diodes show good as well. Also the EOS tests good. Any help?
In Tests - Switch Edge - what does the two left flipper button optos do ? Both should register on the DMD if you pass something between them or press the flipper button in slowly.
LTG : )
Quoted from Aflacjack:The left flipper on my BSD stays up when game is started. The transistors on the board show good and the diodes show good as well. Also the EOS tests good. Any help?
Define 'started'. Turned on or a game started?
Game turned on = bad transistor most likely
Start button pressed = bad flipper switch/opto most likely
Quoted from Rob_G:Define 'started'. Turned on or a game started?
Game turned on = bad transistor most likely
Start button pressed = bad flipper switch/opto most likely
Once you press start for a game. The left flipper locks upright.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fliptronics-2-left-flipper-stuck-up?hl=aflacjack and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.