You're currently viewing posts by Pinsider bigal56.
Click here to go back to viewing the entire thread.
I hope you are not running sandpaper through the playfield switches. Those are gold plated and should be cleaned with paper like a business card.
Possible the eos is not adjusted properly and is opening too soon. The EOS should open at about 80% of the stroke. The EOS should also open before the upper flipper activation switch closes. (Break Make). Check the EOS adjustment by pushing in the flipper link with your finger and not by turning the flipper itself.
Glad you have it. The important thing to remember here is to always adjust flipper switches by pressing the link in and not turning the flipper.
While flipper switch contacts are high voltage and can be cleaned aggressively such as filing them, low voltage switch matrix switches are gold plated and should be cleaned only with paper. A business card or, as we old timers used to do, sliding a dollar bill through them.
You're currently viewing posts by Pinsider bigal56.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flipper-stutter-on-bally-paragon?tu=bigal56 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Palatine, IL