Here is a good article with pics.
https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers
You're currently viewing posts by Pinsider ArgosySK.
Click here to go back to viewing the entire thread.
Here is a good article with pics.
https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers
Quoted from Sparky2000:I read through at least the first 15 pages, and I didn't see any spring washer. I just feel like I am missing something.
Sorry about that.
I alway put the spring wash between the coil and coil stop. remember to squeeze it tight. That will compress the washer. I forget that step on the 1st flipper rebuild and it makes a real difference.
post #13 from Vid's Guide
Quoted from vid1900:When installing the Coil, squeeze the brackets towards each other as you tighten the cap head bolts.
You don't want the coil moving around robbing your game of power. Tight is what you want, no play, no slop.
You're currently viewing posts by Pinsider ArgosySK.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flipper-rebuild-question-12-washer-where-does-it-go?tu=ArgosySK and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.