Does anyone have a template(or a drawing) for a Williams Strike Zone flipper assembly, specifically how it is mounted in relation to the shaft hole in the plafield? We got a set in a box of parts and want to rebuild and mount them for a school project. I could eyeball it from pictures of the playfields, but if someone has the exact dimensions, it would be very helpful. Thanks!

Ok, so I got no response from this. Instead, I looked at a picture of the flipper assembly on IPDB. It looked like the flipper was mounted straight, with the spring not quite pushing the shaft enough to hit the adjustable bracket. I worked backwards, drilling a hole for the flipper bearing, then mounting the bracket and coil assembly to roughly fit the right location.