First thing I'd check is the solder joints at the coil lugs. Good joints ? Diode on tight ? This wires from coil windings to coil lugs - dig around them for cracks or breaks.
LTG : )
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
First thing I'd check is the solder joints at the coil lugs. Good joints ? Diode on tight ? This wires from coil windings to coil lugs - dig around them for cracks or breaks.
LTG : )
Quoted from rx2006je:Issue resolved. The previous owner had but a 15amp fuse on the flipper when a 3amp should have been used.
That didn't resolve it. You weren't blowing the fuse so amperage of fuse didn't matter. Though it's best to have the correct fuse in there to protect the game.
LTG : )
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flipper-issue-stern-sam?tu=ltg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.