The Walking Dead (Pro)
Stern, 2014You're currently viewing posts by Pinsider Monk.
Click here to go back to viewing the entire thread.
I know I’m bumping an old topic, but I also have a slight hop on the right flipper. I’ve tried adjusting my guide, but very little play there. It helped but didn’t solve the hop. Anyone have a link to the thin flipper rubbers?
Also comparing TWD flipper bats to my GoT & MET bats, TWD center of the bar is slightly higher then the center of the guide. GoT/MET bats are dead center of the guide.
Quoted from chuckwurt:https://www.titanpinball.com/index.php?route=product/product&path=33&product_id=52
Flipper Ring - Thin Standard
I also thought what about dremeling out the holes of the bushing slightly so you can shift it down more so it’s in line with the guide better?
That is a possibility, but you’d have to have some guts to do it. I hate doing anything to a playfield.
Quoted from chuckwurt:The bushing is a piece of plastic that goes onto the flipper mech. It’s a $2 part I’m suggesting modifying.
Oh the bushing itself. That makes more sense.
Quoted from Spyderturbo007:I gave up on this forever ago because the damn guide has no play. I was too much of a wus to enlarge the hole. I'm going to give those flipper rubbers a try.
I ordered them a couple of days ago. The hop is so little, I have to imagine the flipper rubbers will work.
You're currently viewing posts by Pinsider Monk.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flipper-hop-1?tu=Monk and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Springfield, OH