Road Show
Williams, 1994So, I'm almost ready with the install, up to the last item. Connecting the wires to the subwoofer.
The problem now is that I have TWO wires and there are THREE terminals on the sub.
NEG, LOW and HIGH. It would be obvious that one wire goes on the NEG and the other on LOW or HIGH.
But which one?? 
There is nothing in the manual on this. Strange.
Which terminal have you guys used?
Thanks.
High is for more bass..... low is for less bass. I have installed using the high, but if you feel its too much bass use the low.
Doug
Dug nailed it! I personally start on high and adjust the knob, if not good enough move it to low. On my sterns I have been using high, my Cftbl I used low.
There is only a 3db difference between the 2, if I remember correctly. I have some install videos out there which cover the topic. Think they are on the ff site now
Apekop, what title are you installing the FF in?
It's in the Roadshow now. I'm not too crazy about the CFTBL and it won't be a keeper.
The sound started out a bit disappointing but after I played it for a while it really cleared up.
I really like it now. I put the wire on High and it sounds good. I can feel the bass in my hands when I play.
The new speakers must be bringing good luck because an hour after I put them in I blew my old record out of the water! 
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flipper-fidelity-install and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Richmond, VA