Somewhere along the line, previous owner swapped N relay with an incorrect replacement and questionable wiring. I’ve got it sorted out to the point where I now have the correct relay/switch configuration.

I’ve traced all the circuits in order to resolder the switch connections, but a close up photo of the wire connections to N relay would be an additional helpful reference to confirm switch to switch red/white buss jumper configuration, etc.

If another Flipper Cowboy owner happens to have a closeup photo of that relay’s wiring connections, it would be appreciated.

Thank you!
Alex

Hey thanks much for posting. I wound up painfully tracing all the different wire colors to each switch on the relay.

But, this will be a great way to check my work, or trouble shoot if there’s a problem. Machine is not quite ready for testing yet.

Again, appreciate your time with this!

alex