Huntley, IL
Quoted from aerobert:Ok, I'm familiar with that. Thanks
However, both flipper coils energized when the machine turned on. They quickly dropped, assuming when the F112 fuse (solenoid secondary) blew on the power board. I believe its most likely something with the fliptronics board as both coils energized even though only one gives ok values.
I turned off the machine, and when turned on, it blew the house breaker fuse.
Going to borrow a working fliptronics board from a friend and see what happens.
Be sure to check or shotgun the diodes on the flippers before swapping boards, if the diodes are still jacked you will break the "new" fliptronics board.
If you have already replaced/checked the diodes AND fired up the game again it popped your fuse or stuck on the diodes need to be replaced again.
Andrew
