Medieval Madness (Remake - LE)
Chicago Gaming Co., 2015Hello -
Please excuse the novice question, but I'm a newbie to pinball. I am wondering if someone could explain how to adjust the flipper bats on my MMRLE? Currently the bat angle is too shallow so its very difficult to ever stop the ball on the flipper. Basically I need to adjust the bat angle. Would love a little insight prior to tinkering with my new machine.
Thanks in advance for the help
Quoted from PtownPin:Hello -
Please excuse the novice question, but I'm a newbie to pinball.
Quoted from zacaj:If you loosen it, you should be able to adjust the flipper angle, then tighten it again.
Zacaj right on point there and as a noob you should know you gotta CRANK that bad boy down to lock it in place. You'll think you're tightening it too much...that's prob good enough. If you don;t you'll see the flipper will come loose again in a day or 2.
Enjoy
Quoted from TheLaw:Zacaj right on point there and as a noob you should know you gotta CRANK that bad boy down to lock it in place. You'll think you're tightening it too much...that's prob good enough. If you don;t you'll see the flipper will come loose again in a day or 2.
Enjoy
But if the two sides of the crank that you're tightening around the shaft touch, stop tightening! Or you'll break the bolt like me .... 
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flipper-bat-adjustment-medieval-madness-remake-le and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Rochester, NY
Calgary, AB