You're currently viewing posts by Pinsider daly124.
Click here to go back to viewing the entire thread.
So I'm having an issue with the new CPR playfield I installed. Both locked balls will get stuck in the oval switch holes and not rest on the metal walker arms. Sure I can shake the machine to fix it easy and I'm sure I will have to sand it down or something. Just wondering if anyone else has this issue and what way you approached to fix it.
20230124_153545 (resized).jpgQuoted from Kevlar:Had this problem with mine, the fix for me was to move the walker mech about 1/4" towards the lockdown bar. Once I did this even if a ball sat in the groove the finger above it knocks it forward when the mech operates.
This did the trick, thanks for the advice!
Quoted from sevenchord:Been working on an F2K I picked up last Thursday before York show. Got lots of things sorted out, and have it playable, but still a lot to do. Re-pin connectors, yopps to replace the flaky sockets, needs battery mod, etc. Had no sound when I got it, think it's just the connectors need repinned - sound is working now, but the speech board was missing. Ordered the VSU-2 from Glodstone, and literally three days later it was in hand. Checked switches and jumper, plugged it in, and it was perfect! Big thanks to Glodstone for creating this board and amazingly fast shipping too!
I'm contemplating the Beehive overlay...
Here is an option for the bad lamp sockets underneath. I put this in my game and it works great.
You're currently viewing posts by Pinsider daly124.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flight-2000-club-members-and-fans-welcome?tu=daly124 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.