Could you attach a pic of the front & back of the door with lamps on ?
I'd be looking for how the lamp busses are run & possible places something disconnected.
My machine isn't close so I can look at mine though.
You're currently viewing posts by Pinsider chas10e.
Click here to go back to viewing the entire thread.
Could you attach a pic of the front & back of the door with lamps on ?
I'd be looking for how the lamp busses are run & possible places something disconnected.
My machine isn't close so I can look at mine though.
Quoted from Dr_Dude:One of the pins on your rectifier board in the bottom cabinet is bad: Try wiggling those connectors, and I'm sure you'll find that that is the culprit..
https://www.ipdb.org/files/887/Stern_1980_Flight_2000_Schematic_Diagram_paginated.pdf
connector J3 pins 1,2,10and11 would be my guess , should be the same wire color could show some stress from heat as well.
Quoted from ekimremlap:Trifurcon .156?
yup. https://www.pinballlife.com/156-trifurcon-crimp-terminals.html
I don't know why Pinball Life doesn't have the 0.100 sized ones ... but good to have both on hand
Discussion on crimpers posted here: https://pinside.com/pinball/forum/topic/help-best-crimp-tool-for-repinning-connectors ... I got the $22.oo one from Amazon it it works great for both sizes https://www.amazon.com/HT-225D-Cycle-Ratchet-Crimping-interchangeable/dp/B007JLN93S
You're currently viewing posts by Pinsider chas10e.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flight-2000-backbox-lights?tu=chas10e and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.