I have a flash gordon. The lower flippers work perfect. The upper flipper works and is strong, but it wont hold. It just slaps once and drops.
These only have 1 flipper on the upper playfield, so I have no comparison. Any ideas?
I have a flash gordon. The lower flippers work perfect. The upper flipper works and is strong, but it wont hold. It just slaps once and drops.
These only have 1 flipper on the upper playfield, so I have no comparison. Any ideas?
I had a similar problem on one of my machines.
It was the eos switch on the flipper.
http://stevekulpa.net/pinball/bally_flipper1.htm
Ok, it was a couple issues. The EOS was hitting another switch when activating. Also, the switch at the lower flipper that provides ground was oxidized. Thanks!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flash-gordon-upper-flipper-wont-hold and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.