Quoted from epeabs:Couple more pictures. And I think your middle screws are for rails.
Where'd you get the 2" silver flipper? Looks good and thinking about do that to mine, since I'm in the process of doing a hardtop as well.
(Topic ID: 65903)
Linked Games
Flash Gordon
Bally, 1981-
Flash Gordon
Bell Games, 1981
Topic Gallery
You're currently viewing posts by Pinsider blowback1976.
Click here to go back to viewing the entire thread.
Anyone have spare Ball guides for the in/outlanes? I'm looking for replacements on both sides. Part number M-121-59.
Quoted from bballfan:I think Cliffy makes them.
http://www.passionforpinball.com/
Sorry, meant the wire guides before the metal flipper ones.
Quoted from FatPanda:This thread may be helpful
https://pinside.com/pinball/forum/topic/wire-ball-guide-help
Looks like I'll be making my own then. Nice find.
Quoted from epeabs:Working through a couple small issues with my FG. All my GI is working with the exception of these four bulbs. They flash on upon startup, but then they all go out at the same time. When I check voltage compared to other GI, all four read differently than anything else. Any thoughts is far as a direction to troubleshoot?
Are those the ones under the Ming plastics? If so, they only light up during certain times during play. That's why they turn on when first powered up. You should also see them cycle during attract.
1 month later
Quoted from ReadyPO:Looks great. The big question - looks like rattle can clear - yes and if so, what kind? And what grit did you sand the inserts?
Used Rust-o-lium 2x clear. Was happy with the results. Started with 100 and worked my way up to 800.
3 months later
I picked up spinner decals from Action Pinball. Looks good, to what mine originally looked like. As for wire forms, I believe I used these 2 - 1/2 inch ones from Marcos, and they were a direct drop in. Just measure it up first.
https://www.marcospecialties.com/pinball-parts/535-5300-01
Quoted from mwiz:Hello,
I'm in the process of a restore.
I have 2 broken inlane/outlane guides. Is there a source for these?
Also does anybody know if there are any US sellers of spinner decals?
Thanks,
Mike
Promoted items from Pinside Marketplace and Pinside Shops!
Houston, TX
You're currently viewing posts by Pinsider blowback1976.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
