Flash Gordon
Bally, 1981You're currently viewing posts by Pinsider quench.
Click here to go back to viewing the entire thread.
Quoted from wamonkey:Backbox board harness hooked up and organized. Re-pinned solenoid driver board plugs (that takes a lot of time). Installed backbox board, flasher assy, LED’s, etc.
Very nice.
The red jumper wire from the main Lamp Driver Board and Auxiliary Lamp Driver board are connected to the wrong locations. See the diagram below - they should hook up to the lamp door braid wire that carries 6 volts to the switched feature lamps.
You're currently viewing posts by Pinsider quench.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/flash-gordon-lacked-flash-and-gordon?tu=quench and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Berkeley Springs, WV
Toronto, ON