I have Williams Flash that keeps blowing diodes on the drop target return coil. The only one I have a problem with is the front one on the left bank that returns the first two drops. I replaced the bad diode and it worked once upon game start, but was blown again when it was supposed to return next. I have a brand new Rottendog board and all the targets seem to be registering.
Since this the one that is stringed off of the 3 bank coil, and I know that one works, I'd like to make sure the wiring is correct. I have the manual but it doesn't have a good wiring schematic, so I was hoping someone here could just snap a picture of the correct wiring or maybe even give me a crude explanation.