Photo: TractorDoc
  1. » Forum
  2. » Tech
  3. » Tech: DMD era games
  4. » Fixing WPC Coin Door / Diagnostic Switches
(Topic ID: 228378)

Fixing WPC Coin Door / Diagnostic Switches

By cody_chunn

5 years ago



Topic Stats

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    018 remount switch plate in cleaned bracket (resized).JPG
    017 Reattach signal wires (resized).JPG
    016 Replace the ground wire (resized).JPG
    015 Push The Pins Out (resized).JPG
    014 Scrape Off the Glue (resized).JPG
    013 Gently slide out the plunger mechanism (resized).JPG
    012 The Locking Arm (resized).JPG
    012 With Button Fully Pressed, Pull Arm Away And Down To Remove (resized).JPG
    011 Compress Spring Toward Cap To Free Locking Arm (resized).JPG
    010 Unmount Switch From Plate (resized).JPG
    008 Straighten The Retainer Pins (resized).JPG
    008 Snip And Unsolder The Ground Wire (resized).JPG
    007 Mount The Switch Plate In A Secure Position (resized).JPG
    003 Wire Position Reference (resized).JPG
    006 Remove Switch Plate From Bracket (resized).JPG
    002 Bracket Screws (resized).JPG

    You're currently viewing posts by Pinsider Pin_Guy.
    Click here to go back to viewing the entire thread.

    0
    1
    1
    #4 5 years ago
     
    D G

    Pin_Guy

    Pinside member

    8y 103K 3,996 11

    Great post for repairing the switches! For a restoration, you may want to consider just replacing it as it may be cost prohibitive to repair.

    Switch bank $15: https://www.marcospecialties.com/pinball-parts/5641-12724-00
    Switch Assy $30: https://www.marcospecialties.com/pinball-parts/27-1099

    You're currently viewing posts by Pinsider Pin_Guy.
    Click here to go back to viewing the entire thread.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

    This page was printed from https://pinside.com/pinball/forum/topic/fixing-wpc-coin-door-diagnostic-switches?tu=Pin_Guy and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.