Very slick Calico. Thanks for sharing.
You're currently viewing posts by Pinsider terryb.
Click here to go back to viewing the entire thread.
Quoted from Superchicken:I'm going to give these a try:
Before using a completely different resin than was recommended I would try it on a scrap board and make sure it works OK.
Quoted from PinballHelp:It still remains to be seen if that stuff can be sanded.
I've used it to repair minor planking and it can be sanded.
Thanks for sharing KingNine. I would be interested to hear what Solarez has to say about it peeling up. I would hope it's just a case of needing to cure longer, but who knows.
You're currently viewing posts by Pinsider terryb.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fixing-inserts-fogged-peeling-delaminated-with-uv-curing-resin?tu=terryb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.