(Topic ID: 165898)

Fishtales No Sounds, Flippers don't work


By GimpMaster

3 years ago



Topic Stats

  • 3 posts
  • 3 Pinsiders participating
  • Latest reply 3 years ago by Pin_Guy
  • No one calls this topic a favorite

You

Linked Games

#1 3 years ago

This was working just fine for a few months and then just stopped one day. Test report shows to check all EOS switches on flippers.

I checked all the fuses and they all meter out just fine. I haven't pulled them to see if the wrong fuse sizes are in yet since I got this working a few months ago.

I'm assuming a power issue but before I start digging through the schematics I figured I would ask you guys.

Dot Matrix works wells
Most solenoids fire (except flippers)
GI and Flashers appear to be working

Thanks

#2 3 years ago

Check the flipper coils maybe just a wire came off.

#3 3 years ago
Quoted from GimpMaster:

I checked all the fuses and they all meter out just fine.

Have you checked the fuses on the Fliptronics board? Have you checked for +12V on the fliptronics board J904-2? Do you have your 50VDC on the flipper coils? If not, Is J901 connected on the on the Fliptronics board? The EOS switches are connected to J906 of the fliptronics board ... is it plugged in.

Just trying to rule out the simple stuff

Promoted items from the Pinside Marketplace
$ 20.00
Electronics
Yorktown Parts and Equip
$ 16.50
Lighting - Led
Lermods
4,700
Machine - For Sale
Chatham, MA

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside