I too could use some help. Just bought a Fish Tales and when I bought it the reel worked, but when I got it home and set it up, it will not spin. The motor is not running during the test mode. I put a voltage meter on the motor leads and was not reading any voltage. I did not know what voltage I should be getting there but did not read any ac or dc voltage. Is there a specific fuse I should look at? Any help in trouble shooting would be VERY appreciated! EDIT...... I am getting 15v dc out of the power driver board on j118 but I am not getting any voltage on the motor side of the EMI board.....

Just a quick note as to how I solved this issue. The wire for J122-4 was broken some where from the EMI board to the power board. I found this by doing a continuity test on the line. Ran a jumper wire to EMI board and all is well.