Speaking of the Caster's Club - we have a Fish Tales , our 1st pin, recent purchase and we took off the Caster's Club plastic to replace the 2 related light bulbs.

While it was very easy to remove the Caster's Club plastic we haven't been able to properly put it back together (it's difficult to reach the nuts on each of the screws when replacing the plastic ).

Right now we have the Caster's Club just setting there and every so often it falls and we have to prop it back up. The seller told me a week after purchase that a 90 degree pair of needle nose pliers may do the trick , even still if 90 degree will reach back behind the Caster's Club it will be difficult to hold everything in place for each of the two lengthy screws as they are installed. I guess this all becomes easier with experience.

Anyone else have a method , tools to suggest to hold the rear where the rubber grommets , nut,washers - while from the front the two long screws are screwed in?

Thanks

Thanks for the advice on the best way to deal with the Caster's Cabin front cover. I those thought about removing the entire housing and willl do so.

Great to see others sharing their Fish Tales pics. Cool video most have prob seen but in case haven't this PAPA tutorial covers FT pretty well

.

There's also some neat FT info on the Mark Ritchie TOPcast podcast interview as well as Python's interview / podcast - covering why were lightning flippers chosen , was the fish originally intended to speak