Fish Tales
Williams, 1992You're currently viewing posts by Pinsider Dkjimbo.
Click here to go back to viewing the entire thread.
Does anyone have a BOM and/or other photos or info that might help me make my own MonsterfishMOD? I have the figurine but have no idea how it was modified or what parts are used to make it function. I know there’s a replacement light socket required (or custom fab?) that has tabs to allow for the eye lights to get connected on the circuit for the insert but what lights are used and how is it mounted etc?
Quoted from Jon9508:I made one over the weekend. I used 2 Flickering 3mm LEDs. Drilled holes in his eyes and glued them in. I wired the to a comet matrix blub. Just plugged it in the socket behind the stand up targets on the left. You could hard wire it to the lamp board if you wanted it flash when monster fish insert is lit. I just went the easier way with Flickering leds.
What voltage? looks like Amazon has a ton of options.
Quoted from Mancave:If you are plugging into GI or controlled inserts it will be 5V, flashers are always 12V.
Everything on Amazon is 3v. if I wire that into the 5v insert circuit, will it overload and blow a 3v LED?
https://www.amazon.com/JABINCO-Circuit-Assorted-Science-Experiment/dp/B0827KYRFH/ref=sr_1_2_sspa
You're currently viewing posts by Pinsider Dkjimbo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fish-tales-casters-club?tu=Dkjimbo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Matthews, NC