what does a fish tales CPR gold playfield go for these days?
Adam.
You're currently viewing posts by Pinsider Badamack.
Click here to go back to viewing the entire thread.
Quoted from PinballT:Just put the finishing touches on it.
Nice. Is that a 3d translite? If no, then, what are you backlighting it with?
Quoted from PinballT:Just LED's in front and #44 in back for diamond. Decal is from a friend at a print shop and has high gloss on it. The background decal turned out really nice. I have the diamond insert out just a little bit to get 3 D effect.
White leds or other?
Quoted from hailrazer:12: New decals for fish inserts.
And here are some pics:
Which fish decals did you use?
I want quality ones
I've seen some that fit awful.
Does anyone have play-field scans to aid in making water slide decals for fish tales?
I know some places sell decals, but, I think they're the thick vinyl type sticker, not water-slides.
Please correct me if I've got that wrong.
Thanks,
Adam.
I have 2 solenoids that don't fire in test.
Where to start?
#3 ball popper (though it seems to work in gameplay)
And
#11 eject hole.
Help? Please?
Quoted from northerndude:Check wires right at coils, work your way back down the wires and troubleshoot. Check fuses, if you have a manual, find the wiring diagram and check out possibilities.
Did this just happen all at once or did you just get pin and they both just don't work right off the bat for you?
Thank you for trying.
Both were working then weren't.
Loose connector. Oops.
Back in action!
Feeler:
What's a new in box CPR gold, playfield worth? Trying to decide if I should use the one that came with my game or just sell it...
Help?
Power to several solenoids seems to have gone out simultaneously.
Outhole, pop bumpers, etc.
They all seem to have the violet with orange wire in common. And I think they all land on the j130 block in the back box?
Any idea what I should check next?
Please and thanks,
Adam.
Help!
When i turn on my fish tales and start a game the auto plunger just keeps kicking.
About once every 2 seconds.
Do i have some kind of short?
Where should i start troubleshooting?
Thanks again,
Adam.
The crazy solenoid behavior quit after i replaced the f104 fuse again and one of the 3/8 amp fuses on the display board that looked bad.
It played well for a few days, just an hour or so a day.
Now I’m getting weird behavior again on those pops, shooter, and slings that are on the f104 fuse.
Does this sound like a board problem? Or some other type of short?
Any thoughts / recommendations are welcome.
Thanks in advance,
Adam.
Pretty sure i have a bad left outlane switch.
I looked in the manual but i can't tell what the part number is.
Can anyone help me out with this?
Quoted from northerndude:Try emailing RetroRefurbs
I've tried Dave at rr 3x.
Thru the website and email. No response. What's up?
I just want to buy some decals.
Quoted from Badamack:I've tried Dave at rr 3x.
Thru the website and email. No response. What's up?
I just want to buy some decals.
Fwiw: Dave did respond today.
Or, maybe this link will work?
https://pinside.com/pinball/forum/topic/fish-tales-restoration-2
You're currently viewing posts by Pinsider Badamack.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fish-tales-casters-club?tu=Badamack and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.