Surahammar
Quoted from data_eastside:Update- the switch arm that presses the switch was the issue. I took it off and reconfigured it so that it was pressing the switch when the wall went down and so far it's working perfectly. This thread helped me immensely :
https://pinside.com/pinball/forum/topic/vids-guide-shadow-sanctum-target-repair
While you’re messing with it here’s a “fix” I made a little quick and dirty on mine as it sometimes wouldn’t pop up the sanctum wall high enough for the locking pin to grab it.
I made a bushing on the pop up arm out of two dry wall plugs, one 8mm and one 10mm. Perfect fit and cost is negligible.
Also congratulations on an absolutely fantastic game. I love mine to death.
9B2132BE-F8E5-488B-B9FE-4A80F1966997 (resized).jpeg4CA006D9-4E10-4AC2-AB00-BB76E36D6CAF (resized).jpegEF61375E-7067-4B32-9FDF-7D02033CE34E (resized).jpeg
Buffalo, NY
Hamilton, ON
