Firepower
Williams, 1980You're currently viewing posts by Pinsider Pinball-DOOD.
Click here to go back to viewing the entire thread.
Hey all,
Recently, my FirePower knocker has been super weak! I went ahead and replaced the Q41 driver and pre driver for that knocker hoping that would fix the issue but it did not! Could the coil just be bad? It just sort of hums and the plunger barely moves. This plunger moves freely when I move it through the coil with my finger. Any ideas? Thanks!
Quoted from frunch:Take a resistance/ohms reading from the coil and report back.
Will do! Diode test?
Quoted from frunch:You want to use the resistance/ohms test--it will have the omega symbol: Ω
Sure! Thanks! Will get back to ya
Quoted from PINTEC:Weak coil after testing OHMs:
Connect a wire to ground, with power on, ground Q41 Tab
Coil still weak?
Ground Knocker coil Lug (brown -Blue wire side)
Good?
suspect short in harness at connectors
Reseat solenoid and cabinet plugs between head and cabinet.
Okay, sure! Will look into this, thanks!
Quoted from PINTEC:Weak coil after testing OHMs:
Connect a wire to ground, with power on, ground Q41 Tab
Coil still weak?
Ground Knocker coil Lug (brown -Blue wire side)
Good?
suspect short in harness at connectors
Reseat solenoid and cabinet plugs between head and cabinet.
So when firing the coil manually via a wire (I have one with miniature alligator clips), can I clip one end to the ground strap and then touch the other end to the tab of Q41?
You're currently viewing posts by Pinsider Pinball-DOOD.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/firepower-weak-knocker-issue?tu=Pinball-DOOD and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Louisville, KY