Hi.
The top right pop bumper has locked on and I've replace the transistors but still no joy. Can anyone point me to whichever chip controls this?
Thanks in advance.
You're currently viewing posts by Pinsider the4horse.
Click here to go back to viewing the entire thread.
Hi.
The top right pop bumper has locked on and I've replace the transistors but still no joy. Can anyone point me to whichever chip controls this?
Thanks in advance.
Thanks for your help. I've replaced the diode & Q6 & Q5 and will try and locate a IC8 chip at the local electronics shop tomorrow...hope that works! I have had the boards rebuilt recently and had the machine given the once over by a techy but I keep losing all sound and speech and this problem with the pop bumper keeps rearing it's ugly head.
Quoted from Schwaggs:Remove J13 from the driver board and see if the coil still locks on. If it does, you have a board problem. If it does not, you have a switch and or wiring problem.
Thanks. It ended up being the 7402 chip at IC8. The soundboard had a stuffed 6802 chip. All good for now; fingers crossed.
You're currently viewing posts by Pinsider the4horse.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/firepower-pop-bumper-coil-locks-on?tu=the4horse and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.