Was working on my Firepower today, doing a coil replacement on the "shield" outlane coil. The replacement coil would up blowing the 4A fuse for my solenoids. I went to put the original back in and now it is staying in the "on" state at power-up. Currently running the Rottendog MPU/Driver combo and Power Supply boards. Double checked the activation switch, and it is still open. Tried a 3rd coil and it stays powered on as well. HELP PLEASE!

Edit: I have the double-red wires connected to the neg side of the diode on the coil, and the green wire on the positive side.