Use a logic probe up the chain from the pre-driver and look for stuck line. Probably one of the buffer chips or the PIA (if socketed, swap the pia with another).
Could also be a cracked solder joint on a chip leg.
Don C.
You're currently viewing posts by Pinsider don_c.
Click here to go back to viewing the entire thread.
Use a logic probe up the chain from the pre-driver and look for stuck line. Probably one of the buffer chips or the PIA (if socketed, swap the pia with another).
Could also be a cracked solder joint on a chip leg.
Don C.
You're currently viewing posts by Pinsider don_c.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/firepower-lamp-row-not-working?tu=don_c and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.