Firepower
Williams, 1980You're currently viewing posts by Pinsider PINTEC.
Click here to go back to viewing the entire thread.
Quoted from RGarriott:Hello everyone. Just had a question as to what i should be checking for. Right now i have 3 lamps out. The “I”, “1000”,,”9000” lamps are not working. The lamp diagram show that it is row 6. What should i do from here?
Thanks for the help
Ryan[quoted image][quoted image]
Suspect shorted wire:
Check for a broken red/blue wire at all lamps in that row that leads to the non working lamps.
Quoted from RGarriott:So according to the matrix sheet would you suspect that i should check between
The “5” target arrow lamp and the “9000” lamp?
Check all lamp sockets except Match and Game over lamps which is on the insert board,until the broken wire is found.
The sockets are chained together out of order against the matrix, however have the same Red with Blue stripe signal wire attached which connect from one socket to the other.
The working signal could either leave one of the working lamps (5 Target Arrow lamp,4X lamp,or bottom right pop bumper) and be broken at one of a non working lamp or the other way around.
You're currently viewing posts by Pinsider PINTEC.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/firepower-lamp-matrix-help?tu=PINTEC and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chicago, IL