Firepower II Playfield

Here I go again now restoring the playing field of the Firepower II, I am really very happy thanks to a guy I contacted who restored his pinball with a stamp with a more modern design, I thought it was going to be harder to take this pinball apart, I'll have fun putting it back together
Well let's say the design was not perfectly flat, so I put the glass in a safe place to flatten it, tomorrow I will begin to sand it with very very fine sandpaper

16028222255191685011088659461260 (resized).jpg

IMG-20201012-WA0033 (resized).jpeg

IMG-20201014-WA0001 (resized).jpg

IMG-20201014-WA0002 (resized).jpg

IMG-20201014-WA0003 (resized).jpg

IMG-20201014-WA0008 (resized).jpg

IMG-20201014-WA0009 (resized).jpg

IMG-20201014-WA0010 (resized).jpg

IMG_20201015_163749 (resized).jpg

IMG_20201015_163757 (resized).jpg

#2 3 years ago

DJR

Gorgar666

Pinside+ Frequent

Wait...wuttt? What is this? Stamp? Hardtop? My FP2 PF is trashed....glued down? Please explain. How much?....

#3 3 years ago

WXN

Waxon

Pinside member

Yes, it is indeed a stamp, I got it from a boy in another forum, I can put you in contact with him, here in Mexico the material that I printed is vinyl, it works very well The plastics continue to shine, you will have to sand all the wood and then varnish, I will varnish tomorrow

IMG-20201016-WA0013 (resized).jpg

#4 3 years ago

WXN

Waxon

Pinside member

It is very easy to disassemble this pinball, I will have a lot of fun putting it together again

#5 3 years ago

WXN

Waxon

Pinside member

#Gorgar666 Originally I planned to restore it by hand, but it was too much work, apart from the wood already needed varnishing, can you send me a picture of your firepower II?

#6 3 years ago

DJR

Gorgar666

Pinside+ Frequent

OP
Quoted from Waxon:
#Gorgar666 Originally I planned to restore it by hand, but it was too much work, apart from the wood already needed varnishing, can you send me a picture of your firepower II?

Ok I’ll send a pic.

1 month later

#7 3 years ago

DJR

Gorgar666

Pinside+ Frequent

Quoted from Gorgar666:
Ok I’ll send a pic.

image (resized).jpg

#8 3 years ago

WXN

Waxon

Pinside member

Quoted from Gorgar666:
[quoted image][quoted image][quoted image][quoted image]

Our machines were the same in that regard, I am sending you the file, send me a message to agree on it

1 week later

#9 3 years ago

DJR

Gorgar666

Pinside+ Frequent

1A53C0B1-6FCE-49F0-B150-497B6ECA4E78 (resized).jpeg

702DCD07-0588-4CAE-8E72-FC353283C68A (resized).png

710A72B6-1049-4F2F-9DE3-3C77194F1F28 (resized).jpeg

#10 3 years ago

WXN

Waxon

Pinside member

Thank you and from each yellow point of the W to each point how many inches are they?

#11 3 years ago

???

JethroP

Pinside+ Frequent

6y 101K 3,133 9 14 1

OP
Quoted from Waxon:
Yes, it is indeed a stamp, I got it from a boy in another forum, I can put you in contact with him, here in Mexico the material that I printed is vinyl, it works very well The plastics continue to shine, you will have to sand all the wood and then varnish, I will varnish tomorrow

Do you have pictures of the finished playfield?

#12 3 years ago

DJR

Gorgar666

Pinside+ Frequent

4 1/8 tip to tip

12571AAC-6D9A-48F2-8008-304B4EECB837 (resized).jpeg

#13 3 years ago

WXN

Waxon

Pinside member

Quoted from JethroP:
Do you have pictures of the finished playfield?

Let see if I have some, since I am not at home right now, I have only had a few, but let see if I have some

#14 3 years ago

WXN

Waxon

Pinside member

I found these JethroP

IMG_20201017_141545 (resized).jpg

IMG_20201017_170135 (resized).jpg

IMG_20201019_140842 (resized).jpg

IMG_20201019_150016 (resized).jpg

IMG_20201103_134512 (resized).jpg

#15 3 years ago

WXN

Waxon

Pinside member

so for the correct measurements
Yellow rectangle 2inch
Blue rectanle 4 inch
Brown rectangle 2.25 inch
And in the image that has a single yellow rectangle, in reality how many inches are they?
swillie Gorgar666

16078878605423161079078106085185 (resized).jpg

16078879911747273314245234736026 (resized).jpg

#16 3 years ago

DJR

Gorgar666

Pinside+ Frequent

Yellow 2 1/4 on the top yellow

#17 3 years ago

???

JethroP

Pinside+ Frequent

6y 101K 3,133 9 14 1

OP
Quoted from Waxon:
Let see if I have some, since I am not at home right now, I have only had a few, but let see if I have some

Nice playfield!

#18 3 years ago

DJR

Gorgar666

Pinside+ Frequent

image (resized).jpg

#19 3 years ago

DJR

Gorgar666

Pinside+ Frequent

image (resized).jpg

#20 3 years ago

DJR

Gorgar666

Pinside+ Frequent

image (resized).jpg

#21 3 years ago

DJR

Gorgar666

Pinside+ Frequent

image (resized).jpg

#22 3 years ago

DJR

Gorgar666

Pinside+ Frequent

image (resized).jpg

#23 3 years ago

WXN

Waxon

Pinside member

Quoted from JethroP:
Nice playfield!

thank you very much, it's like a custom hardtop you know? I just didn't think about putting protective mica on it and it's scratching, apart I hit it a little crooked, I will edit the file so that it comes out much better than before, if you want the file I can send it

#24 3 years ago

WXN

Waxon

Pinside member

Quoted from Gorgar666:
[quoted image]

Gorgar666 Thank you very much for the measures, I will take them into account to restore my machine

3 months later

#25 3 years ago

???

imczr

Pinside apprentice

Unknown

4y 5,900 1

Where can I get one of these stamps/vinyls from?

2 years later

#26 5 months ago

BEB

brzezicki

arcade-cabinets.com

7y 72,300 667 1

Quoted from imczr:
Where can I get one of these stamps/vinyls from?

anyone here have the file? I thought there was a hardtop for firepower II but apparently I was looking at a regular FP. I can have a beat up FP II coming and would like to do put it on. once I do that I can laser cut my own PETG top and put over it to make it look like a hardtop.

-brian

4 weeks later

#27 4 months ago

DVC

Giraldus117

Pinside member

Oak Harbor, WA

<1y 10,750 1 1

Quoted from brzezicki:
anyone here have the file? I thought there was a hardtop for firepower II but apparently I was looking at a regular FP. I can have a beat up FP II coming and would like to do put it on. once I do that I can laser cut my own PETG top and put over it to make it look like a hardtop.
-brian

DM me, i have files

2 months later

#28 74 days ago

DJR

Gorgar666

Pinside+ Frequent