Anyone have a list of what the test point voltages are suppose to be on the Voltage Regulator board in Fireball Classic? Just want to see if someone has this handy before I dig through the Schematics and try to find them...
Thanks..
Anyone have a list of what the test point voltages are suppose to be on the Voltage Regulator board in Fireball Classic? Just want to see if someone has this handy before I dig through the Schematics and try to find them...
Thanks..
TP1 = +4.9 to 5.2 vdc
TP2 = +190 vdc (Turn this down to 170vdc to save the displays)
TP3 = +4.9 to 5.2 vdc
TP4 = +230 vdc
TP5 = +12 vdc to 16.5 vdc
Quoted from vid1900:TP1 = +4.9 to 5.2 vdc
TP2 = +190 vdc (Turn this down to 170vdc to save the displays)
TP3 = +4.9 to 5.2 vdc
TP4 = +230 vdc
TP5 = +12 vdc to 16.5 vdc
Thanks.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fireball-classic-test-point-voltages-voltage-regulator-board and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.