If you took it apart to transport, make sure your Jones plugs are all plugged in correctly and fit snugly.
You're currently viewing posts by Pinsider edednedy.
Click here to go back to viewing the entire thread.
If you took it apart to transport, make sure your Jones plugs are all plugged in correctly and fit snugly.
Quoted from jlbintn:I did not transport it, but it was transported professionally, by a shipper who is no stranger to moving these machines. Something else I need is a good manual that identifies what each switch bank is, and does. I'll eventually figure that out, but right now I'm running blind, so to speak.
Thanks for the tips, I'm going to hit it fresh tomorrow, and this gives me something to start with.
Here's the manual:
https://www.ipdb.org/files/852/Bally_1972_Fireball_Manual.pdf
...and the schematic:
https://www.ipdb.org/files/852/Bally_1972_Fireball_Schematic_Diagram_continuous.pdf
Quoted from jlbintn:Checked the fuses, they're all good, but I'm ordering new fuse holders. I hope to put the meter on the transformer today.
edit to add:
scoring motor is now functioning properly, scoring seems to be fine, but I don't know the game well enough to know if everything is scoring properly.
No need to check the transformer. It's the fuse holders. It's a Bally. It's always the fuse holders
Easiest way to tell if a game is scoring properly is to go through and hit every possible scoring switch with your finger and observe what it does. Since Fireball is a multi-ball game you'll have to put balls in the right and left captive holes and trigger switches to see if they release properly.
This might help a little:
fb1 (resized).jpgYou're currently viewing posts by Pinsider edednedy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fireball-cam-motor-does-not-stop-cycling-game-will-not-play?tu=edednedy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.