OP

Quoted from abendix:

Hi
I'm trying to bring an old clunker of a Firepower back to life and have a strange issue. The Fire and Power flasher lights are on at all times - they don't go off as though they are part of the GI. I have checked the transistors for these lights on the controller board and they look ok. As you can guess from my post I'm not highly technical but can manage the basic things.
Any suggestions on what to try /look for will be appreciated.
Thanks

OP

Quoted from abendix:

Hi
I'm trying to bring an old clunker of a Firepower back to life and have a strange issue. The Fire and Power flasher lights are on at all times - they don't go off as though they are part of the GI. I have checked the transistors for these lights on the controller board and they look ok. As you can guess from my post I'm not highly technical but can manage the basic things.
Any suggestions on what to try /look for will be appreciated.
Thanks

OP

Quoted from abendix:

Yep - lights out when unplugged.

OP

Quoted from abendix:

Replacing the trani's didn't make any difference
Question - If I connect a globe to a power source and the earth to the driver board and do a solenoid test on that pin, will it test if the board is operating correctly or not? It may be un-authodox but I want to confirm if the board is the problem or wiring.