Quoted from swampfire:Here's my fix for Throne bounce-out: a speed bump. It's mostly hidden behind the throne, and it worked 50 out of 50 times in test mode for me. I cut a Titan post rubber down to about 1/2", sliced it down the middle and placed it over the wireform strut. Then use a little piece of electrical tape to seal the cut. The ball does a tiny little hop, which slows it down enough to always fall correctly.
I only resorted to this because none of the other fixes worked for me.
Thanks for this. I took a 3/8 OD rubber and put a small cut on one side and place it in the same spot. 2 for 2 so far 
Burnt Cabins, PA
