I'm officially in the club! I Played an LE at Pinlawyers house in Scottsdale a few days ago. Fell in love with it immediately. Looked online and saw one for sale nearby for a fair price. Picked it up this week.

Stripped to bare playfield
Cleaned, waxed, replaced all lower rubbers with translucent Titans
Fixed right eos so you can now back hand the right ramp with ease
Added shaker motor
Added Mcfarlane figures (build them, cut paper template for plastic mount, cut mounts, mount figures with E6000)

Back glass is signed by Steve Ritchie as a bonus

Took a few picks of the figures, also a few of entire playfield so you can see scale

This is an extraordinary game!

Toys link
https://www.amazon.com/McFarlane-Thrones-Stark-Banner-Construction/dp/B0158FADIA/ref=sr_1_2

20161105_121130 (resized).jpg
20161105_121442 (resized).jpg20161105_121122 (resized).jpg20161105_121505 (resized).jpg20161105_121113 (resized).jpg20161105_121429 (resized).jpg

20161105_123206 (resized).jpg

20161105_121410 (resized).jpg
20161105_121417 (resized).jpg
20161105_123201 (resized).jpg

20161104_221843 (resized).jpg

20161101_225527_001 (resized).jpg

Agreed. I stayed away because I had no interest in the show ... not smart, the game is amazing and, of course, the show is loved by millions.

Added Blue coin chutes, lighted blue flipper buttons and blue lane guides tonight

20161105_213059 (resized).jpg20161105_213111 (resized).jpg

Taped it off and ran Meguiars fine cut #2, twice, then Meguiars mirror glaze #3, then waxed ... then played!

Pic 1 is start
Pic 2 is first pass with fine cut #2,
Pic 2B is second pass with fine cut #2
Pics (2) 3 is last pass with mirror glaze

Last pics are after waxing

20161106_193546 (resized).jpg20161106_193702 (resized).jpg20161106_193743 (resized).jpg20161106_194010 (resized).jpg20161106_193922 (resized).jpg20161106_194737 (resized).jpg

Ordered and installed Beatmasters GOT pop caps. He has 2 (Targaryen & Stark) of the 3 designed (and I think is working on the 3rd)

Both fit with no mods other than using the longer screws that Beatmasters includes.

I think he did a wonderful job on these. They look and feel like high quality and replace a simply terrible plane Jane OEM part.

I've included a pic of where the vertical clear plastic piece would need to be trimmed to fit the 3rd pop cap when Beatmasters completes it. Would take no more than a minute to cut it.

I did remove the vertical plastic above the lower pop just to install ... once the pop cap is in, that vertical plastic installs right back no cutting no problem.

I also unscrewed the throne in order to access the second screw on the upper right pop. Easy 2 minute job, the put it back and tighten the 2 screw's that hold it. Again, the throne went back into position with no problem, no rubbing on new pop cap, plenty of clearance.

Only change to game besides looking much classier was that these are opaque and do not allow light through the top. Of course, the pop bumper body still transmits light through the body. Honestly it is not noticed in game play but I thought I'd mention it.

These are really nice, and I'm really pleased with how they look
The price is also very fair.

Highly Reccomended. (Thx Beatmasters for the "extra's" in the envelope!)
20161110_210401 (resized).jpg

20161110_210525 (resized).jpg20161110_210647 (resized).jpg20161110_210835 (resized).jpg

20161110_193642 (resized).jpg

Very nice. Enjoy!