You're currently viewing posts by Pinsider Bwheels.
Click here to go back to viewing the entire thread.
It looks like when the speakers "pop" the 5v led goes on and off at the same time on the circuit board in the picture
I reseated everything and it seems to be an issue with the upper playfield I got into test and all the upper playfield switches where throwing errors so I disabled it and was able to play a game. Any thoughts on how to fix the upper playfield issue?
Will do. I will take then upper playfield off tomorrow. Fuse F6 seems to also not be working probably related.
Quoted from Bowlingpin:I had the same problem along with many others when I got a family guy a few months ago.. Does it give you the check 12v error fuses 12 + 13 when the speaker popping stops?
When I spoke with Chaz from stern tech support he mentioned removing resister 86 from the cpu(it's a very small mounted component so be careful). My family guy has been trouble free since.
Yes it eventually blows the fuses and says check 12V and fuses 12 and 13. how the heck do i remove resister 86?
thanks for the response
You're currently viewing posts by Pinsider Bwheels.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fg-locked-in-boot-mode?tu=Bwheels and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.