For my Bally power play, the 2x feature light has always worked, but it's been a bit flaky lately. I replaced the socket and bulb, and it quit working, unlike all the other feature lights I put new fixtures and bulbs in for. I replaced the transistor for the 2x feature light on the lighting board, but still nothing. My multimeter reads around 2.5 volts for the 2x feature light when the bulb should be on, while the multimeter reads 4.5 volts for the 3x and 5x feature lights when they are on. I thought maybe the new transistor was bad, replaced it again but still no luck, only 2.5 volts. Any ideas what I should do next?