Awesome Thread!! Please, the more detail and pics the better!! I have the same project ahead of me, however mine is a basket case without a populated playfield, just a nicely clearcoated CPR replacement and new replacement wiring harness!
You're currently viewing posts by Pinsider AUKraut.
Click here to go back to viewing the entire thread.
Awesome Thread!! Please, the more detail and pics the better!! I have the same project ahead of me, however mine is a basket case without a populated playfield, just a nicely clearcoated CPR replacement and new replacement wiring harness!
Quoted from Mudflaps:They’re called solder lugs. 8 for $1 on pinrestore.
https://www.pinrestore.com/Hardware.html
Also a lot of guitar parts places have them also:
Quoted from Mudflaps:Good progress today. Replaced all star posts and polished ball guides, wire frames, etc.
One of the challenges is solving micro-problems related to screw length, bulb size, etc. For example, the Comet LEDs take up more real estate than 555 incandescent bulbs. I added a few washers to clear a plastic.
In another case, I couldn’t source Philips head 6 screws at the right length, so I used the single slot screw. I’ll likely replace them done the road but they serve the purpose now.
Shiny:
[quoted image]
Progress:
[quoted image]
Big favor: when you have all the posts placed can you take a pic without any plastics?? That would help me tremendously when I start putting together my basket case Fathom....
Quoted from Mudflaps:Here ya go!
The topside is pretty much done minus the new rails. They should be here any day, so while I wait, I’ll adjust the switches, sand the rollover inserts, finish the zip ties, and anything else left.
I should be ready to plug in this weekend. Hopefully the game doesn’t explode. [quoted image][quoted image][quoted image][quoted image][quoted image]
Awesome!!! Very much appreciated!!!
You're currently viewing posts by Pinsider AUKraut.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fathom-playfield-swap?tu=AUKraut and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.