Hi all. I picked up a Fathom about a month ago and have slowly getting a restore done. Can anyone tell me what eos switch's I need for the flipper buttons? Also the manual is fairly light on part info, can anyone point me to a parts list or general part manual for the era for the game? Thanks

http://www.planetarypinball.com/mm5/merchant.mvc?Screen=BOOK
All the part catalogs are posted at PPS for bally & williams. Great resource

Ive got a whole bag of original used posts and I think my original cave plastic is intact. Pm an email and I can send some pics.

Lower right flipper

20180729_171347 (resized).jpg

20180729_171354 (resized).jpg

20180729_171420 (resized).jpg

Upper right flipper, let me know if you need more

20180729_171608 (resized).jpg

20180729_171616 (resized).jpg

20180729_171624 (resized).jpg

Reading comprehension is obviously not my strong suit. How about these? Out of curiosity what is the issue your having?

20180729_224041 (resized).jpg20180729_224049 (resized).jpg20180729_224059 (resized).jpg

That is a strange one. Here's some more pics. The top leaf in the stack is the white/red wire with the unbanded side of the diode attached to it. The banded side of the diode connects to the 3rd leaf blade on the bottom with the brown/white wire in the middle.

20180729_232004 (resized).jpg

20180729_232026 (resized).jpg

Just in case that doesnt help i woukd go thru and make sure all the pancake capacitors have been clipped off the switches if you haven't already.

If anyone has been looking for a playfield -
https://pinside.com/pinball/forum/topic/fathom-cpr-playfield-plastics#post-4516548

Hard to tell from your pics but it looks like your missing the pivot bar on that mech. Compare the parts on the green to the blue one.

20200226_004932 (resized).jpg