Quoted from TractorDoc:

Thought it was about time I post a link to my Fathom restore thread (I know it says Paragon, click it anyway ) Finally made enough progress to add a few pictures here.
Just finished stenciling the upper cabinet and will be working on the bottom cabinet stencils next.
https://pinside.com/pinball/forum/topic/project-paragon-breathing-life-back-into-the-beast/page/6#post-5003006[quoted image][quoted image][quoted image]

Quoted from TractorDoc:

A question for fellow owners. This is the first Bally I've gone thru with the transformer/power module/rectifier board in the bottom cabinet. My original setup looks to have a bridge rectifier (above the red arrow) between the board and fuse bracket. The way it is wired in I want to think it is added on; are my suspicions correct or is this a recommended configuration? Only two terminals on the bridge rectifier are tied into the board. I am trying to study the schematics but thought it appropriate to ask here as well.
[quoted image]
Making progress on the cabinet. The lower cabinet is stenciled/painted and I'm starting to get a feel for how the trim looks.[quoted image][quoted image][quoted image][quoted image]