Still looking to buy a used play field, any condition to be used to lay out wiring harness jigs. Thanks.
Shawn
You're currently viewing posts by Pinsider Mk1Mod0.
Click here to go back to viewing the entire thread.
Still looking to buy a used play field, any condition to be used to lay out wiring harness jigs. Thanks.
Shawn
Okay, owners, a little help if you please. I am making a playfield harness for a client and there is a huge discrepancy in the schematics as there seems to be with a lot of Bally machines.
According to the "wiring diagram playfield", A3J2-4 powers the 1st green inline D/T and the top drop target reset. Also A3J2-9 powers the 2nd green inline drop target and the 6 D/T reset coil.
Now if you look at the "wiring diagram backbox" you will find it shows just the opposite to be true. A3J2-4 powers the 2nd green inline coil and the 6 D/T reset while A3J2-9 goes to the 1st green inline D/T and the top drop target reset.
Can someone take a peek under their play field and let me know which is correct? Thanks in advance!
Shawn
Quoted from mjmpin:why would you want additional power source not switched?
"Service outlet." So a tech in a dark arcade could plug in a light, solder iron or anything else without having to go diving under a machine to get to an outlet. And you could do this without having the machine fired up. No extension cord required.
Shawn
Quoted from Star_Gazer:wish me good luck
I did an overlay on my Space Invaders and then put a play field protector over that. Took a little trimming to get it perfect but it plays wonderfully now.
You're currently viewing posts by Pinsider Mk1Mod0.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/fathom-owners-club?tu=Mk1Mod0 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.