Chicago, IL
Quoted from tristan2400:Hello!
So just got my repaired boards back today along with my master display and two slave displays that work.
The boards were upgraded and repaired if you look at my previous posts on how bad they were.
I hooked them all up and the displays.
Powered on, and all the lights and master display and two of the other displays lit up, all the numbers were working.
I went to attempt to change it to free play to see if the rest of the game worked, and was messing with the buttons on the coin door, the numbers were working when they were pressed, then they just flicked off, can’t get them back on!
I tried unplugging all the boards and power cycling and nothing, I am beyond devastated, the one thing I was looking forward to with my daughter and bam.
What can I do or should do? Is there a way to get the game to start without the display or free play?
I put coins in and they go straight to the return slot.
Please help!!
And I just ordered two new replacement displays for players 3 and 4 along with new rubber and led kit…..can’t even get the thing to play!!!
[quoted image][quoted image][quoted image]
Looks like the boards were partly serviced:
Driverboard:
Corroded TIP 42's still present after board work done.
Cpu:
header pins may have been replaced with the wrong short kind should be Part Number GPE-2420-10-2260
IC 9 and IC 10 not removed and jumped.
Check Scanbe sockets are present:
Check software sockets 14,17,20 Mpu IC 1 and Ram IC 13 that they were replaced.
Check the 3 Logic fuses one on power supply and two on remote fuse card.
Remove the driverboard and reseat to cpu.
f869b9f5f40140b44ff0cc15719e7d83644907c1 (1) (resized).jpgf869b9f5f40140b44ff0cc15719e7d83644907c1 (2) (resized).jpgf869b9f5f40140b44ff0cc15719e7d83644907c1 (resized).jpg
