I could use a little help been shopping an F14 got everything working with the exception of the upper right flipper.

Checked power on all the coil lugs matches other coils.

Took a test lead and grounded center lug coil fired.

Checked flipper switch making good contact.

I jumped the blk/Ylw Wire from the switch to the upper lug on the coil and engage the switch still nothing.

Any ideas what I should look at next?

EOS Switch was nasty so I changed it out with a new one (normally closed) also replaced the cap and coil. Still no upper right flipper? all flipper work fine.

Here it is... the blk/blu wires are from the EOS.

A2CF3EE2-9C45-4E1E-8CBC-C92DAD41A797 (resized).jpeg

B718A49D-474C-4457-8A92-1DBA0D3693C7 (resized).jpeg

I ran a jumper wire from the switch to the coil and it fires when depressing the switch but it’s machine gunning.

OK problem resolved thanks for all the help. The coil was bad and I had a bad wire from the switched. Both correct and working fine